Oil / Petrol centrifuges 
Digtor 22 C, Digtor 22 C-U, Digtor 22 C-8
 
Especially designed for working with oily substances as well as the reagents used in regulations applicable with oil.
Effective, quick, versatile, allowing you to work with 6” and 8” conical profile tubes, pear type tubes and “finger” type tubes for small volumes. It has a pre-installation for incorporating a gas release system at any time during the life of the equipment.
Designed for oil/petrol applications according the standards: ASTM D 91, D96, D 893, D 1796, D2273, D2709, D 2711, D 4007, D 5546, API 2542, API 2548, BS 4385, ISO 3734, ISO 9030, IP75, IP 359, NF M07-020, DIN 51793. 
 
Models Digtor 22 C and Digtor 22 C-8 
Heated
Fits Babcock bottles
Preheating program with rotor spinning and temperature selectable. Allows keep the chamber at working temperature before starting the process.
Regulation of the room temperature +5°C (41°F) to 80°C (176°F) in 1°C/1°F steps Programmable in °C o °F.
Temperature sensor inside the chamber. Overheating protection.
Internal isolated avoiding heat lost.
 
TFT color touch screen, visible from more than 3 m.:
Shows RPM and RCF, time, acceleration/deceleration values (PCBS and unbalancing location system (ULS).
Speed programming in 10 RPM/10 xg steps.
Real RCF values on screen based in accessories configuration.
Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
40 programmable memories, with protection under password.
Several acoustic and visual messages warning the user the device situation.
Lid provided with security systems:
– Automatic lid lock system, motorized with double lock.
– Emergency lid-lock release.
– Locking and protection against opening along the run.
– Lid dropping protection.
– Port in the lid for calibration and operation checking.